MPEG LA 4 ch MPEG-4 Manual de usuario descargar pdf (Pagina 12)

CONNECTIONS AND SETUP

-8-

3.2 Camera Connection

The cameras must be connected and power-supplied BEFORE the DVR is turned on. The DVR will automatically

detect the video system of the connected camera(s) (NTSC / PAL), and switch itself to the correct system.

Connect the camera with the indicated power supply, and connect the camera video output to the DVR video input

port with a coaxial cable or RCA lines with BNC connectors.

Note: For detailed DVR video input / output ports, please refer to “2.2 Rear Panel” at page 5.

For detailed camera operation, please refer to its own manual.

Note: If you want to make a video backup with audio, please connect audio camera to the CH1 which

support the audio function

3.3 Power Setup

This device should be operated only with the type of power source indicated on the manufacturer’s label. Connect

the indicated AC power cord to the power adapter, and plug into an electrical outlet. The power LED “ ” will be on as

green. It takes approximately 10 to 15 seconds to boot the system.

3.4 Date and Time Setting

Before operating your DVR, please set the date and time on your DVR first.

Press the “MENU” button and enter the password to go to the menu list. The default admin password is 0000.

Move the cursor to “DATE” and you can set the date / time / daylight saving in the “DATE” menu list.

3.5 Password Setting

Press the “MENU” button and enter the password to go to the menu list. Then, move the cursor to “ADVANCE” to

enter the advanced setting menu.

In the “ADVANCE” menu, move the cursor to “SYSTEM”. Select “PASSWORD” and press the “ENTER” button to

enter the submenu to set the password (four digits). The default admin password is 0000.

ADVANCE SYSTEM

CAMERA SERIAL TYPE RS485

DETECTION BAUDRATE 2400

REMOTE HOST ID 0

DISPLAY

PASSWORD XXXX

ALERT RESET DEFAULT RESET

SYSTEM

CLEAR HDD HDD-MASTER-1

NETWORK UPGRADE START

BACKUP AUTO KEYLOCK NEVER

HDD INFO LANGUAGE ENGLISH

VIDEO FORMAT NTSC

VERSION 1160-1012-1021-1014-M3-6C1B

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 62 63

Sin comentarios

MPEG LA 4 ch MPEG-4 Manual de usuario Pagina 12